Collecting Box Classic
The proven success model for used clothing collection. Technically perfect with many features.
Collecting Box Classic
DimensionsH 220 cm x W 114 cm x D 115 cm
Weight160 | 142 kg
Product description
The coveted classic
The proven success model for used clothing collection. Technically perfect with many features. The Collecting Box Classic meets the highest quality standards and can be used permanently outdoors. During production, we pay attention to sustainability, safe processes and reliable quality controls. Contact enquiry
Safety and stability
The safety and stability of our Collecting Box Container are the result of our careful material selection and product testing. The Collecting Box Classic containers are made of galvanised sheet metal with a thickness of 1.00 or 1.25 mm. This ensures high stability and durability of the container, even under difficult weather conditions.
In addition, the stability of our Collecting Box Classic containers has been tested and confirmed by DEKRA. Certified with the product safety seal, you can rest assured that our product meets the highest safety standards.
The Collecting Box Classic containers are also equipped with the CE declaration of conformity, which is legally mandatory in the EU and therefore a matter of course.
Quality down to the last detail
All add-on parts of our Collecting Box Classic containers are galvanised, including the foot bars, locking system, hinges and handle. This ensures that our containers are protected against rust and corrosion and have a long service life.
We have also opted for bolted add-on parts for easy repair. The door, access flap, locking system, hinges, foot rods, floor profiles and rubber dampers can be easily replaced if necessary. Our rubber dampers are sourced from industry and offer a high level of UV protection as well as being suitable for use in temperatures from -50° to +65° C.
Another detail we are proud of is the reinforced bottom of our access flap. This provides extra stability and durability, especially when large quantities of old clothes are thrown in.
Our unique design also includes a water-draining door frame with additional drainage holes. This effectively protects the textiles collected in the box from getting wet, which is especially important when the box is placed outside.
Distinctive design and functionality
Our monopitch roof design* ensures that rain, snow and ice are deflected to the back of the box, keeping the drop-off area protected at all times. In addition, the roof shape creates a distinctive front face* that can be perfectly used as advertising space to showcase your business or organisation.
Our trapezoidal wide handle* allows for effortless operation of the insertion flap and is ergonomically designed to offer maximum comfort.
Our Collecting Box Classic containers can be personalised with customer initials or logos. Furthermore, all Collecting Box Classic containers are provided with hidden numbering to ensure clear ownership and thus a unique identity.
*Design protection
Sustainability
Climate-neutral production
Thanks to the use of the latest technology, the installation of photovoltaic panels on our halls and the use of 100% green energy from renewable sources, production at our site is climate-neutral. Together with Redshaw Advisors Ltd., we also offset any remaining CO₂ emissions.
A container for our climate!
Every container can be ordered with the label ‘A container for our climate!’. For each used clothing container we sell, we ensure that the CO2 emissions generated by the material are also offset.
Variable roof shape
If you have specific design requirements, we can also supply other roof shapes to ensure seamless integration with your existing used clothing containers.
Supplementary equipment
Increased number of break-ins? Broken up latches? Uneven spaces? These problems occur very often in the used clothing industry. In addition to comprehensive service, we also offer a wide range of supplementary equipment for our Collecting Box containers. You are welcome to choose different variants within a delivery so that the containers can be individually adapted to the needs at the respective location.
Veneered flap
Separator
Reinforced latch
Adjustable feet
Locks
Level sensor
Mesh trolley
Rolling trolley
Recycling side bin
Design
Our Collecting Box containers are characterised not only by their functionality, but also by their distinct design. They are available in RAL 9016 (traffic white) as standard, but we also offer the option of an individual colour design in all RAL colours. In addition, you can also have your containers labelled with motifs, advertising, logos or lettering specially developed for you ex works or order foil sets for self-adhesion. For this purpose, we use high-quality materials such as self-adhesive digital printing foil Arlon DPF510GT (100 mμ) and lamination Mactac Printcover 899 (70 mμ). The transparent lamination protects the foil from damage and makes cleaning easier.
Our digital printing film with a print quality of 1440 dpi ensures excellent photo reproduction and we guarantee UV resistance for 5 years. You have a choice of different decal sets, including the most comprehensive set +4/TSV with digital print films for the door, front, left side, right side, back and flap. However, it is also possible to put together a customised set of decals. With our labelling option, your container becomes an eye-catcher and attracts the attention of passers-by. The result: a higher collection volume and an aesthetic benefit for the surroundings.
Technical data
| Container | Height (highest point) | 220 cm |
| Container | Width | 114 cm |
| Container | Depth | 115 cm |
| Door | Width | 100 cm |
| Door | Height from container floor | 116 cm |
| Filling capacity | Floor to upper door edge | 1,52 m³ |
| Filling capacity | Upper door edge to insertion flap | approx. 0.4 m³ |
| Filling capacity | approx. 300 kg | |
| Unladen weight | 142 | 160 kg | |
| Max. Total weight | 500 kg | |
| Sheet thickness | Galvanised sheet metal plates | 1.00 | 1.25 mm |
